Simple VME FMC Carrier SVEC
The FMC VME Carrier is an FMC carrier in VME64x format that can hold two FMC cards and an SFP connector. The FMC mezzanine slots use low-pin count (LPC) connectors. This board is optimised for cost and will be usable with most of the FMC cards designed within the OHR project (e.g. ADC cards, Fine Delay).
Other FMC projects and the FMC standard are described in FMC Projects.
SVEC V1 production board - block
diagram
Links
Contact
Licences
Compatible Projects
FMC DEL 1ns 4cha
The FMC DEL 1ns 4cha *delay module* will take in a TTL trigger signal and will send it out to four different outputs
FMC DIO 5ch TTL a
The *fmc-dio-5chttla* 5-channel digital I/O module is a simple board for digital I/O on LEMO connectors
FMC ADC 100M 14b 4cha
The FmcAdc100M14b4cha is a 4 channel 100MSPS 14 bit ADC card in FMC (FPGA Mezzanine Card) format
Latest News
Release 3.0 of gateware available.
We are glad to announce the 3.0 release of the SVEC bootloader bitstream, which adds support for user application data storage in the onboard flash memory.
The bitstream, documentation, instructions and change log are available on the Release 3.0 Wiki page.
Release 2.0 of gateware available.
We are glad to announce the 2.0 release of the official SVEC gateware, including the Golden and Bootloader bitstreams.
The bitstreams, documentation, instructions and change log are available on the Release 2.0 Wiki page.
Schematics review held
Three months after CERN placed the order for the design, we received the schematics for the Simple VME FMC Carrier (SVEC). One week later the first design review came up with suggestions to make the design even simpler and more compatible to the SPEC design that it should follow as closely as possible. The compatibility will make that firmware developed for the SPEC will be easy to port to the SVEC.