Programmable RF Attenuator
Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals.
Four channels with SMA connectors; Three attenuation values: 0, -20dB, -40dB; Bandwidth: DC – 2 GHz.
19-inch rack form factor and controlled and powered over USB.
The primary use of this attenuator is in the Tomoscope and BSM Renovation in the PS of CERN. Only a few will be needed. It will be controlled by USB to specify the required attenuation level.
Front-panel of the RF attenuator. Powered by USB
Top view of 19" module