FMC ADC 400k 18b 4cha iso
Fmc-adc-iso-400k18b4cha is a 4 channel 400kSps 18 bit ADC low pin count
FPGA Mezzanine Card (VITA 57). The ground reference used for the analog
inputs and the ADC is isolated from the ground reference of the FMC
connector. Digital Isolators included allow the data transmission
between two isolated areas. Voltage Bias between two grounds of up to
1kV can be applied, which is measured with a 100MOhm resistor connected
between two grounds and an additional 10 bit ADC.
Analog input voltage ranges: /-5V,/-10V.
TEMPLATE TEXT BELOW*
The project is divided into four sub-projects:
- [Hardware
- design](https://www.ohwr.org/project/fmc-adc-400k18b4cha-iso-hw/wiki)
- Mezzanine board schematic and layout.
- [Gateware
- support](https://www.ohwr.org/project/fmc-adc-400k18b4cha-iso-gw/wiki)
- HDL reference designs.
- [Software
- support](https://www.ohwr.org/project/fmc-adc-400k18b4cha-iso-sw/wiki)
- Linux device driver, library and tools.
- Testing support : Production and functional tests.
Please refer to the corresponding sub-project for detailed information.