News
Simple PCIe FMC carrier SPEC
07-09-2010: Schematics review held
The third schematics review of the Simple PCI Express FMC carrier has been held. Some improvements and simplifications of the schematics are required, after which the PCB layout can be started.
FMC ADC 100M 14b 4cha
08-09-2010: Testing continues
The ADC board is extensively being tested. The harmonics problem seen was actually caused by the signal generator used. The I2C bus is tested and accessing the EEPROM memory, setting the sampling frequency and making temperature measurements are now possible.
OHR Support
OHWR maintenance on 2010-09-03 morning (Friday)
added by Francisco Juan on 2010-09-01 17:20:49.461198 We’ll be performing upgrade tasks on the ohwr.org site. The maintenance work will start around 8:30 am CEST and the site will be down for 30 minutes (approximately).
nanoFIP Test Board
30-08-2010: Presence and id variables read
See http://lists.ohwr.org/sympa/arc/nanofip-test-board/2010-08/msg00000.html
OHR Support
OHWR maintenance on 2010-08-23 morning (Monday)
added by Francisco Juan on 2010-08-20 09:18:12.236301 We’ll be updating ohwr.org for allowing Git repositories. The maintenance work will start around 8:30 am CEST and the site will be down for 30 minutes (approximately).
OHR Support
OHWR maintenance on 2010-08-06 morning (friday)
added by Enrique GarcÃa on 2010-08-05 09:53:46.236398 We’ll be performing upgrade tasks on the ohwr site tomorrow morning. The maintenance work will start around 8:30 am CET. The site will be down for 1 hour.
FMC ADC 100M 14b 4cha
4-08-2010: The board is working
Since mid July we have one board plugged in on Xilinx development kit and powered. Two channels are working as limited by Xilinx development kit clock connections (we’ll change our FMC connections on a V2 to cope with this).
nanoFIP Test Board
22-07-2010: Test board validated
The test board and the software has been validated. It is now ready to accept the first version of the NanoFIP code to start testing the WorldFIP functionality.
OHR Support
The Open Source Hardware Draft v0.3 is out
The Open Source Hardware Draft v0.3 is out. This license was produced by the holders of the Open Source Hardware Summit. The estimated date for the release of v1.0 is September the 24th 2010.