News

CernFIP

16-12-2011: Large scale nanoFIP radiation tests ☢

Follow us on twitter ~:<

OHR Support

OHWR maintenance on 2011-12-19 (Monday) 08:30 CEST

added by Enrique García on 2011-12-15 10:25:42.804719 Hello everyone, Next Monday morning we’ll perform a maintenance update on the ohwr site. On this update we’ll add a new section to the top menu (Home, My Page, Projects, Companies) called “Licenses”.

SPI Boards Package

SPICONTROLLER second prototype delivered !

After the correction of few bugs identified on the first prototype of the board, the second prototype of SPICONTROLLER had been delivered. After power up the board, RTX OS create the TCP task and it can talk to the Soleil Control System.

QDR II controller for Virtex 6

QDRII memory controller core

The prototype of the QDRII controller is based on the Switch Core Board version 3 (SCBv3) developed by Seven Solutions. The ongoing work of this memory controller is available in the SVN repository.

ZIO

ZIO presented in the ht section

https://www.ohwr.org/881 On Nov 23rd 2011, the project has been presented to the hardware and timing section in Geneve. On Nov 24th we had a brainstorming session to refine requirements and increase our TODO list

CernFIP

14-11-2011: Second nanoFIP code review ongoing ⌛

Four designer-experts are looking into the nanoFIp code. The review started on Monday Nov 14th at 11h00 and will be completed on Thursday 17th at 12h00. Review folder here.

CernFIP

31-10-2011: nanoFIP-FielDrive-FieldTR EMC tests

Tests for the compliance of the nanoFIP-FielDrive-FieldTR with the EMC norm IEC 61000 4-4. Test Report available here.

EtherBone Core

Initial EB master slave on hardware: the aftermath

I did a little dry run implementation sending back and forth messages in inside one FPGA for the last WR Dev workshop, reading and writing and reading data to and from a PWM controller hooked up to some LEDs.

Simple PCIe FMC carrier SPEC

11-11-2011: 20 cards commercially produced

The pre-series of the first commercial series production of SPEC cards has succeeded. After repairing some assembly problem with the FMC connector, all twenty cards passed the test on the test bench that was prepared by CERN.